VuPoint Solutions Scanner PDS ST410A VP User Manual

5.2 Inserting a microSD memory card (not included)  
To operate the scanner, you must insert a microSD Card (not supplied) to record  
and store your pictures. Inserting the microSD memory card:  
1. Turn OFF the scanner.  
3. Explanation of the status icons  
PDS-ST410A-VP Manual  
1. Key features  
Color /Monochrome (Mono) scan selection  
2. Insert the microSD card into the microSD card slot (with metal side facing up).  
Gently press in until card is clicked in and latched. The SD card indicator  
must appear on the LCD screen.  
Note: - Do not force the card into the slot; forcing may damage the scanner and the  
microSD memory card. Align microSD card position and try again.  
600/300 dpi scan selection  
Directly save JPG file to microSD card  
Item  
1
Function  
Description  
Supports microSD/microSDHC card up to 32GB  
Driver free to download for Windows® XP, Windows® Vista™, Windows®  
7 and Mac OS® 10.4 or above (direct plug-in, driver installation not  
required)  
5.3 Formatting the microSD memory card  
Note: All content on the microSD card will be erased during formatting. It is  
recommended, but not necessary.  
1. Insert a microSD card into the scanner with metal side facing up.  
2. Turn on the scanner by pressing the [Power/Scan] button for 2 seconds.  
3. Press the [FORMAT] button with a thin, blunt object, such as the end of a  
paperclip to access the button. An “F” will show on the LCD status display  
screen.  
SD card indicator  
Photos will be stored in microSD card  
Battery is full  
Empty battery  
2
Battery indicator  
2. Functional parts  
3
4
5
Effect indicator  
Color or Mono  
Counting indicator  
Selected resolution  
Show scanned files in microSD card  
High:600 dpi / Low:300 dpi  
4. Press the [SCAN] button once to begin formatting the microSD card.  
5. The microSD card indicator will blink until the formatting process is complete.  
4. LED light indications  
5.4 Time and Date setting  
1. Press [TIME SET] button once to enter time setting mode by using a thin, blunt  
object, such as the end of a paperclip to access the button. The LCD status  
display screen will show “1##” (step 1) for the year. “##” is a set of number that  
would be changed to correspond to the actual time/date setting. The numbers  
1-5 in front of the “##” indicates each step in the settings.  
2. Press the [C/BW] or [DPI] button to select the current Year.  
3. Press [SCAN] button once to confirm setting.  
4. Repeat step 2 and 3 to continue the Time and Date setting process  
Part  
Function  
1
2
Battery door  
For 2x AA alkaline batteries  
Indicator  
Setting  
Power On/ Off: Press and hold this key for 2 seconds to  
turn power on or off. In power on mode, press this  
button to start scan, press this button again to stop  
1##  
2##  
3##  
4##  
5##  
Year  
5. Using the scanner  
Power/Scan  
Month  
Date  
Hour  
5.1 Installing the battery  
1. Open the battery door by sliding the battery compartment downwards as  
indicated by the arrow in the diagram below.  
2. Insert 2x AA alkaline batteries into the battery compartment.  
3. Turn on the scanner by pressing the [POWER] button for 2 seconds.  
3
4
5
Error LED indicator Over speed: Red LED on  
Scan LED  
Minute  
Ready for scan: Green LED on  
indicator  
LCD screen  
Resolution  
Scanning status display  
5. After setting the Minute, “5##”, press the [TIME SET] button again to complete  
the Time and Date setting.  
Select High(600dpi)/Low(300dpi) resolution;  
High/Low resolution mode icon will be displayed on  
status LCD  
6
5.5 Setting the resolution  
Press the [DPI] button to select High/Low resolution.  
High/Low resolution icon will be displayed on status LCD.  
Select Color/Mono scan, Color/Mono mode icon will be  
displayed on status LCD  
7
C/BW  
8
9
Time set  
Press this button to enter Time and Date setting mode  
Download photo to a computer via USB cable provided.  
5.6 Setting the scan mode  
Press the [C/BW] button to select Color/Mono mode.  
Color/Mono icon will be displayed on status LCD.  
USB interface  
10 microSD card slot microSD card storage location.  
Press this button with a thin, blunt object, such as the  
end of a paperclip to format the microSD card.  
11 Format button  
 

Tasco Digital Camera 119256CW User Manual
Toshiba Cordless Telephone SX 2981 User Manual
Toshiba CRT Television 14AF45C 20AF45C User Manual
Toshiba Flat Panel Television 24SL415U User Manual
TRENDnet Security Camera TV IP100 N User Manual
Tunturi Home Gym E30R User Manual
Underwater Kinetics Work Light SL4 eLED User Manual
Univex Water Heater NRQSS00110 User Manual
VTech Cordless Telephone IA5864 User Manual
VTech Cordless Telephone VT 2931 User Manual